Short answer: memo aging means sorting every open line by days out, bucketed at 30, 60 and 90, grouped by counterparty. It is a different report from a memo balance, and it is the more useful one. A balance tells you how much is out. Aging tells you how long, with whom, and therefore how much of what is out has quietly stopped being a sales opportunity and started being credit exposure.
Most memo money is not lost dramatically. It ages.
Why the clock matters more than the balance
When you place goods on memo you have extended credit without a loan agreement. Sara Yood, senior counsel at the Jewelers Vigilance Committee, describes the position exactly: "Most of the risk falls on the supplier, who is in effect lending the merchant the agreed upon cost of the goods."
That framing changes what you should be measuring. Lenders do not look only at how much is outstanding; they look at how long it has been outstanding and to whom, because those two together are what predicts a loss. A $40,000 balance spread across eight accounts, all inside terms, is a healthy book. The same $40,000 sitting with one account at 140 days is a problem that has not announced itself yet.
The trade's own reporting supports treating time as the variable. Rapaport's coverage of retail memo practice describes short-term loose-diamond holding periods "shortening up even more as vendors tighten things up," with vendors calling after a few days for status. Pearl and coloured-gemstone dealers offering three to six months on select pieces are described as the exception rather than the rule.
What "how much is out" actually looks like
There is no published industry statistic on memo penetration, and anyone quoting one should be asked for a source. What exists is named-retailer reporting, and it is worth knowing because the spread is so wide.
From Rapaport's reporting: Morrison's Jewelry in New York described somewhere between 35 and 50 percent of loose diamonds on short-term consignment, and 20 to 25 percent of finished stock on longer-term memo — noting that this was the most finished jewelry they had ever had on memo. Christensen's Jewelers in San Jose described 90 to 95 percent of loose diamonds on memo against 5 percent of finished product.
Two established stores, both in the same trade, with loose-diamond memo exposure running from a third to nearly all. Which means you cannot benchmark your own book against an industry figure. You can only age it and decide whether what you see is what you intended.
One more line from that reporting, for anyone about to build a routine: "The amount of manpower for memo is a lot." That is the constraint the rest of this piece is designed around.
A weekly aging routine that takes ten minutes
The discipline is not complicated. It is just easy to skip, and skipping it is cumulative.
Sort open memo by days out, descending. Oldest first, always. The top of that list is the only part most weeks need.
Group by counterparty, not by item. Exposure concentrates by relationship. Ten aged lines across ten accounts is a housekeeping problem; ten aged lines at one account is a credit decision.
Apply thresholds, not instinct. A workable default: a nudge at terms, a call at 60 days, a decision at 90. The specific days matter far less than having a rule, because a rule is what turns "I should probably ring them" into something that happens.
Make 90 days a decision point, not a milestone. At 90 the line either comes back, converts to an invoice, or is formally extended with a new due date and a new clock. What it must not do is keep aging with nobody having decided anything. Silent extension is the single most common way memo losses are made.
Age memo in as well as memo out. Goods you hold from a supplier are a liability sitting in your case, not stock you own. Knowing what is due back and what you have sold but not yet reported is what prevents a supplier statement arriving that you have no basis to argue with.
The 90-day number has a second meaning
There is a reason to care about 90 days that has nothing to do with sales momentum.
Under the bankruptcy preference rules, a court can reverse transfers made within the 90 days before a filing. JVC's guidance on memo transactions flags this explicitly, and it covers transfers of goods, not only payments. So the instinct every supplier has — pull the parcel back the moment a customer looks shaky — is not a clean escape if the customer files shortly afterwards.
The practical consequence is that the useful moment to act on an aged memo is well before the point at which you are worried. By the time the retailer's trouble is visible, the 90-day window is already running.
It is also worth knowing that a signed memo alone does not make you a secured creditor. Most jewelry memo arrangements are consignments under UCC Article 9, which means the merchant is deemed to have the same rights in the goods as you do unless you have perfected your interest by filing a UCC-1 before delivery. Aging tells you where your exposure is; perfection determines what happens to it if a customer fails.
Reconciling an aged memo line by line
The aged lines are the ones most likely to reconcile badly, because the further back a transaction sits the more the two sides' memories have drifted.
The failure mode is familiar: a retailer keeps two pieces from a ten-line memo, returns eight, and pays for "the memo" at a number that matches nothing. The fix is to reconcile per line rather than per document. Eight returned, checked against the tags. Two sold at the memo price on the sheet. An invoice generated from those two lines. The memo closes only when every line has a terminal status — returned, sold, or written off deliberately.
Partial returns are where this earns its keep, and they are common. A memo with ten lines can easily carry five different statuses, and a document-level balance hides all five.
Where Jewelia fits
Aging is a perfect example of work that should not depend on anybody remembering it. Memo & Ledger ages open memo automatically into 30/60/90 buckets with an overdue count per counterparty, so the weekly routine above is a screen you open rather than a calculation you run.
Every line carries its own status — still out, returned, or sold at the price it actually went for — so a partial return reconciles line by line instead of collapsing into one disputed number, and a sold line converts to an invoice in one click. Due-date reminders fire without anyone diarising them. Goods that arrive are confirmed by a link the other side opens without an account, ticking off what actually came and attaching photos, so discrepancies are logged at the point of discovery. And both sides can open the same netted ledger, which is what turns a reconciliation call into a shared screen rather than two spreadsheets that disagree.
The same discipline runs in reverse for goods you hold: memo in tracks what is due back and what you owe. Memo out and the Ledger are on the $179 Starter plan; memo in is on Professional. For the wider system, see how to track jewelry memo without losing goods or friends.
Bottom line
Age memo by days out, grouped by counterparty, every week. Nudge at terms, call at 60, decide at 90 — return, convert or formally extend, but decide. Reconcile per line, never per document. And treat aged exposure concentrated in one account as what it is: an unsecured loan you did not consciously agree to make, at the one counterparty least able to repay it.
This article describes general US commercial practice and is not legal or financial advice.
Frequently asked questions
- What is memo aging?
- Sorting every open memo line by how many days it has been out, usually into 30, 60 and 90-day buckets, per counterparty. It answers a different question from a balance report: not how much is out, but how long it has been out and with whom. Money that has been out 120 days is a different kind of number from the same money out 20 days.
- How long should goods stay out on memo?
- It depends on the category and there is no industry standard expressed in days. Rapaport's reporting describes short-term loose-diamond holding periods shortening as vendors tighten up, with vendors calling after a few days for status, while pearl and coloured-stone dealers may offer three to six months on select pieces — described as the exception rather than the rule. What matters more than a universal number is having a stated term per memo and a routine that notices when it passes.
- How much of a jeweler's stock is typically on memo?
- No industry-wide statistic exists. The best public figures are anecdotal, from named retailers in Rapaport's reporting: one New York store described 35 to 50 percent of loose diamonds and 20 to 25 percent of finished stock on memo; a San Jose store described 90 to 95 percent of loose diamonds and 5 percent of finished product. The spread between those two is the real finding.
- What should trigger a call on an aged memo?
- Set thresholds rather than relying on instinct. A common pattern is a nudge at terms, a call at 60 days, and a decision at 90 — return, convert to a sale, or formally extend with a new due date. The decision matters more than which day you pick, because an aged memo that nobody decides about simply keeps aging.
- Why does aging matter beyond chasing goods back?
- Because on the supplier side memo is unsecured credit. The Jewelers Vigilance Committee's senior counsel describes the supplier as in effect lending the merchant the cost of the goods. Aged exposure concentrated in one counterparty is the shape of risk that turns into a loss if that counterparty fails — and the preference rules mean even retrieving goods inside 90 days of a bankruptcy filing can be reversed.
- Does aging apply to memo in as well as memo out?
- Yes, and most retailers under-run it. Goods you hold from a supplier are a liability, not stock. Knowing what is due back, what you have sold and not yet reported, and what you owe is what stops a supplier statement arriving that you cannot argue with.
Stop reading, start clicking.
Open a live Jewelia company with real inventory, memo, jobs and reports already in it. One work email, no card, no sales call, nothing to install.




