Short answer: the average yearly inventory turn for an American retail jewelry store sits somewhere between 0.7 and 1.2, per INSTORE's Brain Squad reporting. Which means most jewelers sell their stock roughly once a year. That number is low by general-retail standards and it is not, on its own, a problem — but the spread hiding inside it usually is.
The benchmark, with its caveats
INSTORE's Brain Squad survey put the range at 0.7 to 1.2, and asked the panel directly: "Does your store do better than a 1.0 average inventory turn across the board?" The answer split 50 percent yes, 50 percent no.
That is a genuinely useful benchmark because it is a clean median. If you are above 1.0, you are in the better half. Two caveats: the Brain Squad is a self-selected panel of owners and managers rather than a statistical sample, and the sample size is not stated.
One POS vendor publishes a by-store-size breakdown — roughly 0.8 to 1.5 for a small boutique, 1.5 to 2 for mid-sized, and closer to 2 to 3 for a large chain — but cites no external source for any of it. Treat it as an estimate rather than data.
Two formulas, two answers
Before comparing yourself to anything, know which calculation you are running. BIG publishes both:
- By cost: Cost of Goods Sold ÷ Current Cost On-Hand
- By units: Total Unit Sales ÷ Total Units On-Hand
These do not agree. BIG's own worked examples show the same store at 1.29 by the cost method and 1.58 by the unit method. The gap comes from mix — if your faster-moving stock is cheaper, unit turn flatters you relative to cost turn.
Neither is wrong. But quoting one against a benchmark computed on the other is meaningless, so pick one, state it, and stay with it.
Why jewelry turn is structurally low
A jeweler's 1.0 is not a grocer's 1.0 and the comparison is not instructive.
Jewelry is high value, frequently one-of-a-kind, and carries no expiry date. Sherman's observation is that jewelry "won't spoil" and has "no expiration date" — a piece that sits eleven months and sells in the twelfth at full margin has not failed in the way an unsold perishable has.
That is the honest argument for patience. It is also, taken too far, the argument that lets a case fill up with stock nobody has looked at since 2022. The distinction between an asset that is waiting and an asset that is stuck is the real work, and it is not something turn can tell you on its own.
The spread inside the store-wide number
This is where turn becomes useful. BIG's published category data from a single store:
- Diamond semi-mount rings: 0.76 turns
- Diamond stud earrings: 2.16 turns
- Across individual price points within those categories: 0.32 to 3.31
Nearly a threefold difference between two categories, and a tenfold spread across price points. A store-wide figure of, say, 1.1 tells you nothing about either. It is the average of a category that is starving and a category that is stagnant.
BIG's own case notes describe a store above $5 million in sales at 1.59 overall, with four top-performing categories running between 2.5 and nearly 5 times turn. The headline was fine; the distribution was where the opportunity lived.
So the first move with turn is always to break it down — by category, then by price point within category. The second move is to stop there and switch instruments.
Turn is an analysis, not a target
Sherman's line deserves its own section because it inoculates against the obvious misuse: "Turnover is not a number. Turnover is not a goal. Turnover is an analysis!"
The reason is that turn has no margin term. A category turning 3.0 at 30 percent margin generates less gross profit per dollar of inventory than one turning 1.5 at 55 percent. If you manage to turn alone, you will systematically favour the wrong categories.
The instrument that combines both is GMROI — gross profit dollars over inventory at cost — where the jewelry benchmark is $1.00 to $1.50 against an industry average BIG put nearer $0.70 to $0.75. Use turn to find where to look. Use GMROI to decide what to do.
Fixing a slow case
When a category's turn is genuinely poor and its GMROI confirms it, there are only a few real levers.
Stop replenishing it. The most common error is buying more of a category because it is underperforming, on the theory that selection is the problem. Sometimes it is. More often it is not, and the purchase compounds the issue.
Clear the aged tail. Slow turn and aged stock are usually the same stock viewed two ways. The trade target for aged inventory is around 20 percent of total, and JCK has reported that in many stores over half the inventory on offer is aged. Clearing the tail raises turn arithmetically and frees the capital. More here.
Re-merchandise rather than discount, where it fits. Sherman's point about metal prices is worth knowing: "you can shuffle your inventory into different price points depending on what's happening with the prices of metals." A piece that is wrong at one price point may be right at another without touching the margin.
Check the denominator. If memo goods are sitting in your inventory value, your turn is understated before you do anything. They are not your stock — under US GAAP they remain the consignor's until control transfers. More here.
Size the book properly. BIG's inverted GMROI formula gives you the inventory you should own: showcase sales × gross margin percent ÷ GMROI goal. Over-investment relative to that number shows up as low turn by definition.
The cash consequence
Turn is really a cash-flow measurement wearing a merchandising costume.
David Brown of Edge Retail Academy puts the carrying cost of non-performing inventory at around 20 percent per annum, and the arithmetic direct: "For every $100,000 you are overstocked you will be looking at $5,000 to $20,000 in holding costs." His component build-up for a $100 item held twelve months — vendor cost $100, staff time $10, freight $5, interest at 5 percent $5, staff cleaning and other $10 — totals $130 for that item in one year.
Which reframes the whole exercise. Slow turn is not an efficiency metric. It is money leaving the business quietly, every month, on goods that are not doing anything.
Where Jewelia fits
The reason most stores do not have category-level turn is that assembling it by hand is a day's work you have to repeat. Analytics carries more than 40 built-in reports across nine categories including sales by period and category, inventory value at cost and retail, inventory by location and aged stock — the components turn is made of, already split by the dimensions that make the number actionable.
Inventory holds cost and retail per item with jewelry-specific fields across multiple stores, safes and cases, so the denominator is real rather than a year-end estimate, and goods on memo live in Memo & Ledger where they belong rather than inflating your stock value. Jewelia AI is a good fit for the follow-up questions this analysis generates — which price points are below 0.5, what has not sold in eighteen months — without building a report for each one.
Bottom line
Know whether you are measuring by cost or by units, and say which. Expect a store-wide figure between 0.7 and 1.2, and treat 1.0 as the median rather than the goal. Then break it down, because a 1.1 average conceals a 0.3 and a 3.3. Use turn to find the problem and GMROI to decide what to do about it. And keep memo goods out of the denominator, because at these numbers the distortion is not small.
Frequently asked questions
- What is a good inventory turnover rate for a jewelry store?
- INSTORE's Brain Squad reporting puts the average yearly inventory turn for the American retail jewelry store somewhere between 0.7 and 1.2. When that panel was asked whether their store beat a 1.0 average turn across the board, the split was exactly 50/50. So 1.0 is a reasonable line in the sand, but it is a median rather than a goal.
- How do I calculate inventory turn?
- Two ways, and they disagree. By cost: cost of goods sold divided by current cost on hand. By units: total unit sales divided by total units on hand. BIG's worked examples show the same store at 1.29 by the cost method and 1.58 by the unit method, so state which one you are using.
- Why is jewelry turn so much lower than other retail?
- Because the goods are high value, often one-of-a-kind, and carry no expiry. A single piece may sit for a year and still sell at full margin, which is a completely different economic model from fashion or grocery. Comparing a jeweler's turn to general retail benchmarks is not informative.
- Does turn vary much by category?
- Enormously, and that is the point. BIG's published category data shows diamond semi-mount rings at 0.76 turns against diamond stud earrings at 2.16 in the same store, with individual price points inside those categories running from 0.32 to 3.31. A store-wide figure conceals all of it.
- Should I aim for a specific turn number?
- Abe Sherman's answer is no: 'Turnover is not a number. Turnover is not a goal. Turnover is an analysis.' Turn on its own has no margin term, so a fast-turning thin-margin category can be a worse use of capital than a slow-turning rich one. Use turn to find where to look, then use GMROI to decide.
- Do memo goods affect my turn?
- Yes, if you include them. Consigned goods are not your inventory and should not be in the denominator. Counting them inflates inventory on hand and depresses your reported turn — a distortion that matters a lot when the honest number is already around 1.0.
Stop reading, start clicking.
Open a live Jewelia company with real inventory, memo, jobs and reports already in it. One work email, no card, no sales call, nothing to install.




