Short answer: GMROI is gross profit dollars divided by inventory at cost, and it answers the only question that matters about a showcase — for every dollar tied up in it, how much gross profit comes back? The jewelry-specific target published by Buyers Intelligence Group is at least $1.00 and not much more than $1.50. The industry average, as BIG published it in the mid-2010s, sat nearer $0.70 to $0.75.
That gap is the most useful number in jewelry retail math, because it means the typical store is losing roughly thirty cents on the dollar against a target most owners have never calculated.
The formula, and what it means
BIG's published formula is straightforward:
Gross Profit $ ÷ Current Cost On-Hand = GMROI
Abe Sherman's plain-language version is better: "For every dollar you own in inventory, at cost, how much Gross Profit are you generating? When you generate the same in Gross Profit Dollars as you have in inventory, your Gross Margin Return on Inventory will equal exactly $1.00."
So a store holding $600,000 of inventory at cost and generating $600,000 in gross profit has a GMROI of $1.00. The same store generating $420,000 in gross profit is at $0.70 — which is roughly where the trade average sat when BIG last published it.
One technical note before you benchmark yourself against anything: the jewelry trade uses current cost on hand as the denominator, where general retail conventions often use average inventory over the period. The two produce different numbers. Compare yourself against jewelry sources, not against a cross-industry figure you found somewhere.
The other adjustment is memo. Goods you hold on consignment are not your inventory — under US GAAP they remain on the consignor's balance sheet until control transfers — so they do not belong in the denominator. Including them inflates your inventory and understates your GMROI, which is a surprisingly common error. More on that here.
Why GMROI beats turn on its own
Inventory turn tells you how many times your stock sold in a year. It is a real number and worth knowing, but on its own it can point you the wrong way.
A category can turn quickly at a thin margin and consume capital for little return. Another can turn slowly at a strong margin and be a perfectly good use of the same capital. Turn cannot distinguish between them because it has no margin term. GMROI does, which is why it is the better instrument for deciding where the next dollar goes.
Sherman's warning about turn applies here too, and it is worth taking seriously as a general posture: "Turnover is not a number. Turnover is not a goal. Turnover is an analysis!" The same is true of GMROI. A single store-wide figure is a health check. The value is in the breakdown.
Reading it category by category
This is where GMROI stops being a report card and starts being a buying instruction. BIG's guidance reads the number as an allocation signal:
- Around $1.00 — the baseline. The category is paying its way.
- Approaching $1.50 — "you should be looking for growth opportunities."
- Approaching $2.00 — "feed the category."
- At $5.00 — "the category/price point is screaming for inventory!"
A very high GMROI is not a prize. It is a category selling faster than you are stocking it, which means you are leaving sales on the table for want of goods. The instinct to celebrate a high number is exactly backwards.
Their worked example shows the spread inside a single store: "For every dollar we own of Dia Semi-Mt's, we are generating 83 cents of gross profit. However, in our Dia Stud's, we are generating $1.64 of gross profit for every dollar we own."
Two categories in the same case, one at $0.83 and one at $1.64. The store-wide average tells you nothing about either. The action is obvious once you see it: more studs, less semi-mount, or a hard look at why semi-mount is dragging.
Running it backwards: how much should you own?
The most practically useful thing in BIG's material is not scoring your GMROI but inverting it to size your inventory.
Their formula:
Inventory = Revenue – (Custom Sales + Repair Sales + Special Orders) × GP% ÷ GMROI Goal
Or more simply: Showcase Sales × GP% ÷ GMROI Goal, which is the same as Gross Profit Dollars ÷ GMROI Goal.
The subtraction matters. Custom work, repairs and special orders generate sales without requiring showcase stock, so including them inflates the inventory the formula says you need. BIG's rules of thumb for stripping them out: roughly 10 percent of revenue for repair sales, 10 percent for custom, and 20 percent for all special orders. Use your own figures if you have them.
Worked through: a store doing $2,000,000 in revenue with 10 percent repair, 10 percent custom and 20 percent special orders has $1,200,000 in showcase sales. At a 50 percent gross margin that is $600,000 of gross profit. At a $1.00 GMROI goal, the store should own $600,000 of inventory at cost. If it is holding $850,000, it is a quarter of a million dollars over-invested — and that quarter-million is where the aged stock, the debt and the cash-flow pressure live.
Set the goal at $1.00 to start, as BIG recommends. Raising the goal lowers the inventory the formula permits.
What this tells you to actually do
GMROI is only worth calculating if it changes a decision. Three that it should:
Where the next purchase goes. Buy into categories and price points running above $1.50, not the ones you enjoy buying. The categories at $0.80 do not need topping up.
What comes out. Sustained low GMROI in a category is a signal to stop replenishing and start clearing, not to merchandise harder. Which runs directly into aged inventory, where the same stock usually shows up again.
How much you own in total. The inverted formula gives you a defensible inventory ceiling, which is the basis of any open-to-buy discipline worth the name.
Where Jewelia fits
GMROI is a number most stores could calculate and do not, because assembling it by hand across categories and price points is a day's work that has to be repeated.
Analytics is where that stops being manual: more than 40 built-in reports across nine categories, including inventory value at cost and retail, inventory by location, sales by period and category, and a replacement valuation at today's metal spot prices — the inputs GMROI needs, already broken down by the dimensions that make it actionable. Inventory holds cost and retail per item with jewelry-specific fields, so the denominator is real rather than estimated, and memo goods sit in Memo & Ledger rather than quietly inflating your stock value.
And Jewelia AI is genuinely useful for this particular question, because GMROI analysis is mostly asking the same thing repeatedly in different slices — which categories are above $1.50, which price points are below $0.80, what has not sold in a year — without building a report each time.
Bottom line
Calculate GMROI as gross profit over inventory at cost, exclude memo goods, and read it by category rather than store-wide. Target $1.00 to $1.50. Treat anything above that as a buying signal rather than a win, and anything persistently below $0.80 as stock to clear rather than replenish. Then run the formula backwards to size the whole book — because knowing how much inventory you should own is the number that most often turns out to be the one nobody had.
Frequently asked questions
- What is GMROI?
- Gross margin return on inventory investment: gross profit dollars divided by inventory at cost. Abe Sherman of Buyers Intelligence Group puts it in plain language — for every dollar you own in inventory at cost, how much gross profit are you generating? When you generate the same in gross profit dollars as you have in inventory, GMROI equals exactly $1.00.
- What is a good GMROI for a jewelry store?
- Sherman's stated target is at least $1.00, but not much more than $1.50, as a very good range. Against that, he has put the average true GMROI in the jewelry industry in the $0.70 to $0.75 range — a figure published in the mid-2010s, so treat it as a period benchmark rather than a current one.
- Why would a GMROI above $1.50 be a problem?
- It usually means you are under-invested rather than brilliant. Sherman reads high numbers as allocation signals: approaching $1.50 you should be looking for growth opportunities, approaching $2.00 you feed the category, and at $5.00 the category or price point is screaming for inventory. A very high GMROI is a category selling faster than you are stocking it.
- How is GMROI different from inventory turn?
- Turn measures how many times stock sells in a period; GMROI measures how much profit each dollar of stock generates. A category can turn well on thin margin and still be a poor use of capital, or turn slowly on strong margin and be fine. GMROI combines both, which is why it is the better allocation tool.
- Does the jewelry trade calculate GMROI the same way as general retail?
- Not quite. BIG's published formula uses current cost on hand as the denominator, where general retail conventions often use average inventory. That makes a jeweler's GMROI not directly comparable to a published general-retail benchmark, so compare against jewelry sources rather than cross-industry ones.
- Do goods held on memo belong in the calculation?
- No. Consigned goods are not your inventory — under US GAAP they remain on the consignor's balance sheet until control transfers. Including them inflates the denominator and understates your GMROI, which is one of the more common ways this number gets quietly misreported.
Stop reading, start clicking.
Open a live Jewelia company with real inventory, memo, jobs and reports already in it. One work email, no card, no sales call, nothing to install.




